Having a marver mounted on your torch is one of the most versatile tools you can have. A number of different designs are available.
Also, see the Griffin Marver Mounts (below) and the available TPT marver pad for ways to use the TPT system on torches for which TPT mounts were previously not available.
|521000110||for a Minor Burner||$42.00|
Griffin Glass Tools makes a series of marver mounts that all utilize a replaceable marver pad. The innovative metal bracket mounts directly to your torch and the graphite block easily clips into place. This gives you the versatility of selecting the marver surface that you want.
These mounts are available for the following torches:
fits the Nortel Minor Burner (shown here) and the Mega Minor
fits the GTT Cricket, and new style Bobcat (shown here)
Note: GTT recently redesigned the Bobcat. The original Bobcat was the same size as the Lynx. The new Bobcat has a shorter torch barrel; the same length as the Cricket. As a result, some torch top marvers that used to fit the Bobcat will now be too long, and overhang the front of the torch. This marver has been trimmed to fit both the Cricket and the new Bobcat.
fits the GTT Lynx
Note: This marver also fits the original Bobcat, but not the new Bobcat.
Some people prefer a marver that isn't attached directly to the torch barrel. This way, the torch and the marver can move independently. This is such a bracket. It fits all GTT torches, from the Cricket up to the Mirage. (shown here on a Lynx)
Each marver mount comes with a 3" x 2-1/8" reversible graphite block. One side has 5/8", 7/8", & 1" diameter marble molds:
and a flat graphite surface on the other.
|Minor MM||Minor torch mount||$45.00|
|Mini CC MM||Mini CC torch mount||$45.00|
|Cricket MM||Cricket or new Bobcat torch mount||$45.00|
|Lynx MM||Lynx (or original Bobcat) torch mount||$45.00|
|GTT MM||all GTT torches mount||$50.00|
|Knight MM||Knight Bullet Burner torch mount||$45.00|
|Major MM||Major, Mid-Range, and Rex Max torchs mount||$45.00|
|CC MM||CC, Barracuda, and PM2D torch mount||$45.00|
An ARTCO exclusive is the Griffin TPT marver pad. With this pad and the Griffin mounts, it is now possible to use the TPT tooling system on torches for which TPT mounts were not previously available! This graphite marver/mounting pad is flat on one side, and has the TPT mounting system on the other.
|521000210||Griffin TPT marver pad||$32.00|
Designed by Debbie Crowley, this marver fits the Carlisle Mini CC, Wildcat, and Hellcat torchs. The marver mounts to the torch base and has its own pivot. This means that the torch can be moved without moving the marver, and the marver can be moved without moving the torch.
The Crowley Marver comes complete with an 4" x 2-1/2" interchangable graphite pad. For more versatility, you can replace the marver pad with the "The Perfect Tool" base, and be able to use all of the "The Perfect Tool" system of marver tops and attachments.
| Crowley Marver
for the Mini CC, Wildcat, or Hellcat torch
This unique design combines a marver and a hand rest in one. Cut from stainless steel, these are made to fit the Nortel Minor Burner, GTT Bobcat, or GTT Lynx torches. Custom fitting for other torches is available.
Available in either a left hand or right hand model (right hand model shown above). Unless specified, a right hand model will be provided.
|Raz-Minor||for a Minor Burner||out of stock|
|Raz-Lynx||for a Bobcat, Lynx, or Cheetah||out of stock|
These are your basic torch top marvers, featuring a 2x3" graphite pad. Available for the following torches:
the Nortel Minor Burner (shown) and Mega Minor
|BUMINPAD||for the Minor Burner||$25.00|
|BUMAJPAD||for the Mid-Range Plus, Major Burner, or Red Max||$32.00|
|BUHOTPAD||for the Hot Head||$25.00|
|BUCMINIPADAS||for the Mini CC||$25.00|
|BUBOBPAD||for the GTT Bobcat, Lynx, & Cheetah||$25.00|
|BUCPHANTPAD||for the GTT Phantom - 3" x 3"||$32.00|
|BUPM2DPAD||for the PM2D - 3" x 3"||$32.00|