When a talented machinest has a passion for hot glass, you end up with some of the finest brass lampworking tools anywhere. Jim's attention to detail is obvious in every tool he makes. Jim listens to the glass artists, and uses their feedback to refine and improves his tools.
All of these handtools come with wood handles. The handles are both glued and pinned to the shaft, so there is no chance of the handle slipping, rotating, or coming off.
Brass bowl pushes, with a 8" wood handle.
These come in a variety of sizes and shapes, including both rounded and tapered, with and without nips.
| Part Number | Description | Price |
|---|---|---|
| BB-BP25-30 | Bowl Push, 25mm x 30° | $40.00 |
| BB-BP19-30 | Bowl Push, 19mm x 30° | $37.00 |
| BB-BP15-30 | Bowl Push, 15mm x 30° | $35.00 |
| BB-BP19NIP-30 | Bowl Push w/Nip, 19mm x 30° | $40.00 |
| BB-BP15NIP-30 | Bowl Push w/Nip, 15mm x 30° | $37.00 |
| BB-BPR15NIP-30 | Bowl Push w/Nips, Round, 15mm | $37.00 |
Inspired by the Stump Shaper, these tools are available in several sizes, and in both right-handed (shown above) and left-handed (shown below) versions. Complete with a 8" wood handle.
| Part Number | Description | Price |
|---|---|---|
| BB-SS45-63R | Shaper, 45mm x 63mm, Right Handed | $48.00 |
| BB-SS31-50R | Shaper, 31mm x 50mm, Right Handed | $40.00 |
| BB-SS31-50L | Shaper, 31mm x 50mm, Left Handed | $40.00 |
| BB-SS45-63L | Shaper, 45mm x 63mm, Left Handed | $48.00 |
Featuring a 1:7 taper, these reamers come in two sizes. Complete with a 8" wood handle.
| Part Number | Description | Price |
|---|---|---|
| BB-OR12-1:7T | 2-12mm Reamer, 45mm long | $35.00 |
| BB-OR19-1:7T | 2-19mm Reamer, 65mm long | $40.00 |
A variety of brass styli. Each is 9" in overall length, and has a 6-1/2" wood handle.
| Part Number | Description | Price |
|---|---|---|
| BB-ST-DOT | Dotter Stylus | $23.00 |
| BB-ST-DOME | Dome Stylus | $23.00 |
| BB-ST-KNIFE | Knife Stylus | $23.75 |
| BB-ST-RAKE | Rake Stylus | $23.00 |
| BB-ST-REAMER | Hexagon Reamer Stylus | $23.00 |
The brass blade in 3" wide by 3.75" high by 3mm thick. The V is 1.5" deep and is very highly polished. The heavy aluminum base is 4" square, with mounting holes for mounting to your bench top.
| Part Number | Description | Price |
|---|---|---|
| BB-VNECK_3_4 | "V" Necking Tool | $42.00 |